
Services

Buried pipelines and utilities depend on the ground around them, whether they've been in place for decades or are being installed now. A pipe loses its bedding, a utility trench becomes a channel for water, a deep excavation for new work threatens what stands beside it, and a trenchless crossing depends on the ground around the bore behaving predictably. URETEK provides the ground support for all four: restoring support beneath existing pipes and culverts, sealing trench backfill against water, controlling groundwater and protecting adjacent structures at excavations, and soil stabilization, void control, and joint and annular sealing that protect bore paths, launch and reception shafts, and adjacent utilities during trenchless installation by others.
Buried infrastructure depends on the soil around it, before, during, and long after installation.
A buried pipe or culvert left spanning a gap where its bedding has washed out or settled
Water running along utility trench backfill, washing soil out from under pavement and slabs
A deep excavation below the water table next to buildings, tanks, or utilities that can't move
Loose soil along a planned bore path or around launch and reception shafts, or open annular space left after the bore

Our Services
Ground support and void control for trenchless pipe and utility installation, with scope defined per project.

Ground treatment that makes a deep excavation buildable next to existing structures: groundwater control at the cut, protection of adjacent foundations, and stabilized soil around trenches and shafts.

Restoring support beneath and around buried pipelines and culverts that have lost their bedding, with expanding polymer placed in the soil to cradle the pipe, spread its load, and protect its joints.

Stopping water from running along utility trench backfill by filling the voids and densifying the backfill into zones that break the flow path, without reopening the trench.

URETEK provides ground support for trenchless installation performed by others: soil stabilization, void control, and joint and annular sealing that protect bore paths, launch and reception shafts, and adjacent utilities. On a jack-and-bore project in Sun Valley, California, injection support allowed the planned method to proceed. Scope is defined per project.
Yes. Ground support is placed through small injection points, so it suits busy streets, active facilities, and sensitive sites where trenchless methods are chosen to keep the surface intact.
It depends on the site, but avoiding excavation, restoration, and utility relocation costs is often where the savings come from. On an I-15 water main repair, avoiding a 25-foot excavation was the deciding factor in choosing a trenchless-friendly injection repair instead.
Yes. Protecting nearby utilities and structures is a core part of planning any trenchless project, and it's also where URETEK's polymer injection work often supports a trenchless job directly, stabilizing the soil around a bore path or an adjacent excavation before work begins.
Start with what's happening. An existing pipe or culvert that has lost the soil beneath it points to Pipeline Support & Pillows. Water running along a utility trench and washing soil out points to Utility Trench Breakers. A planned excavation below the water table next to existing structures points to Excavation Support. A trenchless crossing that needs the ground around the bore stabilized points to Trenchless Ground Support.
Get your pipeline, trench, excavation, or bore path evaluated for ground support. URETEK crews respond fast, including emergencies.
Request an Assessment