
A settled slab or pavement section doesn't stay a small problem. It disrupts traffic, equipment, and drainage.
Solutions for this Service
Foundation Settlement
Building Out of Level
Added Load on Existing Foundations
Pavement & Runway Settlement
Related Industries
Commercial and Institutional
Municipal Infrastructure
Need a Site Assessment?
800-240-7868

A settled slab or pavement section doesn't stay a small problem. It disrupts traffic, equipment, and drainage. Concrete Lifting & Leveling is controlled lifting of settled slabs and pavement with elevation monitored throughout, while stabilizing the soil beneath so the slab isn't left on the same weak support. Facility owners, engineers, and public agencies use it on warehouse floors, loading docks, airport aprons, bridge approach slabs, and weigh-station slabs, without tearing them out and pouring new concrete.

A settled slab under traffic or equipment affects operations long before it fails. Here's what it turns into when it's left alone.
Bridge approach slabs and weigh-station slabs settling out of level against the adjacent pavement or structure
Facility floors settling under constant forklift, equipment, or foot traffic, creating uneven working conditions
Airport aprons, taxiways, and hangar floors developing faulted or misaligned panels that affect load transfer
Warehouse floors and loading docks settling out of level, disrupting forklift traffic and racking

Settled concrete usually shows itself in small ways above ground before it becomes a safety or compliance issue.
A visible lip or step where one slab section sits lower than the one next to it
Cracks radiating from one corner or edge of a slab
Water pooling on a slab or pavement surface after rain, instead of draining away
Doors, dock levelers, or equipment that no longer sit flush against a settled floor
Water ponding at slab edges or along settled joints
Faulted or misaligned joints on a parking lot, loading dock, or airport pavement

Why facility owners, agencies, and engineers choose Concrete Lifting & Leveling over full slab replacement.
Restores the slab to grade and stabilizes what's holding it up. URETEK 486 Star polymer is injected beneath the settled area, densifying the soil while lifting the slab, so the fix addresses both the surface and the cause underneath it.
Restores a level surface without an open excavation. Because the work is trenchless, there's no exposed pit or trench for pedestrians, forklifts, or vehicles to navigate around during the repair.
The slab stays in place, so the surface stays usable during and after the work. No demolition and no new pour mean sidewalks, floors, and pavement don't need to be closed off and replaced, they're lifted where they already sit.
Most jobs finish in days, not the weeks a full replacement takes. On a Wyoming warehouse project, URETEK stabilized and leveled a 12,000-square-foot floor in three and a half days, and airport and municipal jobs in the case study library routinely close out in one to three days.
The polymer expands gradually to lift evenly, not with one sudden push. URETEK 486 Star expands once injected, applying controlled, even lifting pressure across the injection pattern rather than one abrupt jolt that could crack the slab further.
Concrete Lifting & Leveling is the right call when a slab, floor, or pavement surface has settled or become misaligned, and the concrete itself is still structurally sound enough to lift and reuse. It fits warehouse floors, loading docks, airport aprons, bridge approach slabs, and weigh-station slabs that have gone out of level.
It isn't the right tool when the slab itself is badly cracked or broken beyond what lifting can fix, since no amount of soil stabilization repairs concrete that's already failed structurally; that needs structural repair by others or replacement. It also isn't the starting point when there's no slab yet, new construction planned on weak soil needs Soil Stabilization before a slab is ever poured, not a leveling fix after the fact.
Concrete Lifting & Leveling is frequently the second half of a two-part project alongside Void Filling, when an underground void caused the slab to sink in the first place, filling the void and leveling the slab in the same mobilization avoids a second trip back to the site.
1
Evaluate
A URETEK project manager evaluates the site, the soils, and the failure mode, and designs the treatment around what the data shows.
2
Deploy
Crews mobilize on the schedule the site needs, including nights, weekends, or holidays, in a self-contained unit.
3
Drill
Small holes, as narrow as 5/8 inch, are drilled in a pattern designed around the slab's settlement.
4
Inject
URETEK 486 Star polymer is injected beneath the slab, densifying the soil as it expands and gradually raises the surface back to grade.
5
Monitor
Elevation is checked throughout the lift, so the slab comes back to grade evenly rather than overcorrecting in one spot.
6
Validate
We verify the result with a pre/post elevation survey (plus FWD testing for pavement and plate load testing for industrial slabs) and hand over the injection and test records.
URETEK has leveled warehouse floors, airport pavement, and university facilities nationwide, backed by decades of engineering and execution experience.
Not if the reason it sank the first time gets fixed along with the slab. URETEK 486 Star polymer densifies the soil beneath the slab as it lifts it, so the slab is resting on stronger soil afterward, not the same weak soil that caused the problem. We verify the result with a pre/post elevation survey (plus FWD testing for pavement and plate load testing for industrial slabs). Designed for long-term performance when properly selected and installed. Public projects carry a two-year warranty against settlement. Private projects carry a one-year performance warranty plus a 10-year material warranty. Project terms govern.
Small holes, as narrow as 5/8 inch, are drilled in a pattern designed around the slab's settlement. URETEK 486 Star polymer is injected beneath it and expands gradually, applying gentle, even lifting pressure across the injection pattern rather than one sudden push in a single spot.
In most cases, yes, and often by a wide margin. On a faulted taxiway joint repair in Louisiana, URETEK's process saved the airport more than half the cost of replacing the pavement, while also backing the work with a two-year warranty against settlement.
Yes. On a Wyoming state warehouse project, URETEK stabilized and leveled a 12,000-square-foot floor in just three and a half days using the UDI process, without the extended shutdown a full floor replacement would have required.
Yes. At a landfill weigh station in New York, URETEK stabilized weak subsoils under all four slabs and raised the entrance slabs about 1.6 and 2.5 inches with joints returned to level, in two days without closing the station.
Get a settled slab or pavement section evaluated before it disrupts operations. URETEK crews respond fast, including emergencies.
Request an Assessment