
Soil doesn't need a hole to disappear. Water can carry it away grain by grain through a crack, a corroded culvert, or a failing pipe joint, and some ground keeps losing it year after year.
Applied in these Services
Soil Stabilization
Void Filling
Related Industries
Transportation
Municipal Infrastructure
Need a Site Assessment?
800-240-7868

Soil doesn't need a hole to disappear. Water can carry it away grain by grain through a crack, a corroded culvert, or a failing pipe joint, long before anyone notices a dip or a void. And some ground is simply more prone to it than the rest: karst limestone that dissolves over decades, a bank that's always been hard to hold, soil near water that never quite drains the way it should. URETEK stabilizes that soil in place, stopping the erosion before it becomes an empty space underground, and fills any void it has already formed. Transportation departments, rail operators, public works agencies, and property owners turn to it whenever soil is gradually eroding or migrating away, or a site keeps producing erosion-related voids.

Soil loss is usually a slow process with a specific, findable cause, or a site whose ground is prone to it. Here's what URETEK sees most often.
Water repeatedly washing fine soil particles through a crack, joint, hole, or oxidized culvert wall
Wave action, current, or flowing water gradually eroding soil along a bank, pond edge, or waterway
Karst geology, limestone or other soluble bedrock that gradually dissolves and collapses into voids over time
A site with naturally poor drainage or a high water table that keeps groundwater moving through the soil continuously

Soil loss is easy to miss until it's added up to something bigger. Watch for these.
Soil visibly thinning, settling, or disappearing along a bank, slope, or pond edge over time
A culvert, pipe, or drainage structure with visible oxidation holes or corrosion where fine soil could be escaping
Recurring minor settlement in the same general area that keeps needing small repairs
Erosion control measures, rock, vegetation, prior patches, that keep failing in the same location
A geotechnical or geological survey identifying karst, limestone, or other erosion-prone bedrock beneath the site
Multiple, seemingly unrelated void or settlement incidents across the same property over time

This is the right page when soil is gradually eroding or washing away, or a site's geology keeps producing erosion-driven voids, whether or not a specific void has formed yet.
It's not the best fit in every case. Check these first:
Soil loss through a culvert or pipe often traces back to the pipe's own condition. If a specific pipe is the source, Pipe Penetration Leaks is worth checking too, and Weak Soils is worth reviewing if bearing capacity is also a concern.
What stabilizing eroding soil early, instead of waiting for it to become a void, actually gets you.
Strengthens and locks soil in place, addressing the ongoing erosion mechanism directly rather than only patching the surface symptom above it
Reduces the risk of repeated, unpredictable void incidents across a property with known erosion-prone geology
Keeps the area usable during the work. On a Brick Mill Road project in Middletown, Delaware, crews worked overnight from 7 p.m. to 5 a.m. specifically so the road could reopen each day
Measured in hours, not days. A railroad erosion project in Baltimore was completed in under 20 hours total, including setup, breakdown, cleanup, and final inspection
Structural polymer is injected along the erosion path, sometimes creating a continuous treated zone rather than a single point. On a Missouri City, Texas pond bank, over 100 injection sites formed a continuous 500-foot stabilized zone along the bank
Soil Stabilization and Void Filling, the Services, perform this fix together, chosen based on whether the soil is still washing out or a void has already formed
URETEK's general approach starts with finding whether the erosion has already produced a confirmed void, or whether the soil itself is still washing out. Crews then inject expanding polymer accordingly, densifying soil that's actively eroding or losing fines and locking it in place, and filling any void that has already formed. Depending on how far the erosion has spread, this can mean a continuous treated zone along a bank or culvert rather than a single injection point.
This is the combined job Soil Stabilization and Void Filling perform. It's different from Void Formation's response to a confirmed void with no ongoing erosion, and different from Sinkholes' response to an already-open hole.
URETEK has stabilized eroding soil along ponds, railbeds, and roadways for public agencies and property owners nationwide.
On an effluent pond in Missouri City, Texas, URETEK created a continuous 500-foot stabilized zone using more than 100 injection sites along the pond banks, addressing the full erosion path rather than patching a single spot.
On a railroad erosion project in Baltimore, voids beneath the railbed were initially estimated at up to 12 inches deep, stretching several hundred feet, confirmed before the injection plan was finalized.
A geotechnical or geological survey reviews the area's known geology, karst or limestone bedrock, sandy soil, or a high water table, along with any history of prior voids or erosion incidents on or near the property, before treatment is planned.
Yes, in most cases. On a Brick Mill Road project in Middletown, Delaware, crews worked overnight from 7 p.m. to 5 a.m. specifically so the road could reopen each day, and the Baltimore rail line project was completed in under 20 hours.
A damaged or corroded culvert gives water a direct path to carry soil away. In Middletown, Delaware, DelDOT identified a systemic issue where oxidation holes at the crown of corrugated metal pipe culverts were causing fine loss through the holes across many locations, not just one.
Get the eroding soil stabilized before it turns into an open void.
Request an Assessment